PVC & uPVC Pipe Supplier Locations in Saudi Arabia
4B Factory (Four Brothers Industrial Co.) manufactures PVC and uPVC pipe at Al-Kharj Industrial District 27 and delivers to thirteen service areas across the Kingdom, from Riyadh and the Eastern Province to Jeddah, Makkah, Madinah, Taif, Hail, Yanbu and Tabuk. Every location page lists the products specified locally and the governing standards.
How Our Delivery Network Works
All 4B Factory pipe is extruded at a single plant in Al-Kharj Industrial District 27, roughly eighty kilometres south of Riyadh. Supplying the Kingdom from one production site rather than a distributor network means the pipe a contractor receives in Tabuk carries the same batch controls, the same compound and the same standards documentation as pipe collected at the factory gate.
Delivery is arranged per project rather than by fixed route. Central-region orders for Riyadh and Al-Kharj are the shortest haul. Eastern Province, Qassim, Hail and Western-region deliveries are consolidated into full loads so that long-haul freight is not charged against a part load. Where a contractor has requirements in more than one region on the same corridor, such as Madinah and Yanbu, those are scheduled onto a single load.
Multi-site contractors can have one order split across several delivery addresses. List each address and the quantities per site with the bill of quantities so the loads can be planned correctly.
Where We Supply PVC & uPVC Pipe
Thirteen location pages, each covering the project types, local conditions and product mix specified in that region. Open the page for your area to see what is typically ordered there.
Central Region
Al-Kharj
Factory-gate collection, agricultural irrigation, well casing and industrial estate supply from Industrial District 27.
View Al-Kharj →Riyadh
Same-day and next-day supply to the capital for contractor, MEP, developer and municipal network work.
View Riyadh →Qassim
Well casing, borewell and deep-well abstraction pipe, plus perforated and slotted uPVC well screen.
View Qassim →Eastern Province
Eastern Province
Region-wide hub covering the Jubail industrial corridor, petrochemical plant work and coastal soil conditions.
View Eastern Province →Dammam
Port, logistics and municipal network supply, with corrosion-free uPVC specified for saline ground.
View Dammam →Khobar
Waterfront and corniche development, commercial and residential towers, hospitality and leisure projects.
View Khobar →Western Region
Jeddah
Coastal commercial and port-city supply, high-humidity conditions and large residential developments.
View Jeddah →Makkah
Pilgrimage-scale water supply and drainage loading, hospitality construction and utility upgrades.
View Makkah →Madinah
Agricultural irrigation, date-farm supply and urban expansion water and drainage networks.
View Madinah →Taif
Elevated distribution where static head pushes the specification to Class 5, plus stormwater and terrace drainage.
View Taif →Yanbu
Red Sea port, industrial estate and inland agricultural supply, with potable distribution and coastal drainage.
View Yanbu →Northern & North-Western Regions
Hail
Centre-pivot irrigation mains, deep-well casing and screen, and consolidated long-haul delivery to the north.
View Hail →Tabuk
Long-haul consolidated delivery to the north-west for utility, agricultural and development projects.
View Tabuk →Approximate Haul Distance From the Al-Kharj Plant
Indicative road distances from Industrial District 27, Al-Kharj, with the delivery band each region typically falls into. Distances are approximate and lead time is confirmed per order.
| Service area | Approx. road distance | Delivery band | Typical product mix |
|---|---|---|---|
| Al-Kharj | Factory gate | Collection or local | Irrigation, well casing, perforated uPVC |
| Riyadh | Around 80 km | Short haul | Watermain, sewer, conduit and duct |
| Qassim | Around 400 km | Consolidated | Well casing, slotted screen, watermain |
| Dammam | Around 430 km | Consolidated | Sewer, watermain, ASTM pressure pipe |
| Khobar | Around 450 km | Consolidated | Watermain Class 4 and 5, sewer, duct |
| Eastern Province (Jubail) | Around 500 km | Consolidated | ASTM Schedule 40 and 80, conduit |
| Taif | Around 700 km | Long haul | Class 5 watermain, stormwater, perforated uPVC |
| Hail | Around 720 km | Long haul | Watermain, perforated well screen, duct |
| Makkah | Around 880 km | Long haul | Watermain, sewer, fabricated fittings |
| Jeddah | Around 950 km | Long haul | Sewer, watermain, duct and conduit |
| Madinah | Around 1,000 km | Long haul | Irrigation, watermain, perforated uPVC |
| Yanbu | Around 1,030 km | Long haul | Watermain, sewer, ASTM Schedule pipe |
| Tabuk | Around 1,400 km | Long haul | Watermain, sewer, agricultural lines |
Table compiled by 4B Factory (Four Brothers Industrial Co.) as an internal delivery reference. Distances are approximate road distances from Al-Kharj Industrial District 27 and are provided for planning purposes only. Confirmed lead times are issued with each quotation.
Available in Every Service Area
The full range is produced in Al-Kharj and supplied to all thirteen regions. Open any product for sizes, classes and governing standards.
Watermain Pressure Pipes
uPVC Loc-Ring pressure pipe 50 to 315 mm. Classes 4 and 5.
More Information →
Sewer & Drain Pipes
uPVC sewer system per SAS 1395 and 1396. Class 2 to 4, 110 to 710 mm.
More Information →
uPVC Duct Pipes
Electrical conduit and duct per SAS 254 and 255. Sizes 20 to 63 mm.
More Information →
What We Supply Across These Regions
Water Supply Networks
Potable and utility distribution using uPVC watermain pressure pipe in Classes 4 and 5. See water supply projects.
Sewage & Drainage
Gravity drainage and municipal sewerage in Class 2 to 4, 110 to 710 mm. See sewage and drainage projects.
Electrical & Telecom
Underground cable protection to SAS 254 and 255 and NEMA TC 2. See electrical conduit projects.
Infrastructure & Industrial
Large-diameter municipal and process pipework at tender scale. See infrastructure projects.
Why Contractors Order Direct From Al-Kharj
Standards Documentation
Compliance paperwork supplied with every order. See the standards hub.
Factory-Direct Pricing
Buy from the manufacturer with no distributor margin on project quantities.
Consolidated Long Haul
Full-load consolidation so long-distance freight is not charged against part loads.
Custom Fabrication
Fittings, long bends and couplings fabricated to project specification.
Single Batch Control
One plant, one compound, consistent quality control regardless of destination.
Multi-Site Splitting
A single order can be split across several delivery addresses for one contractor.
Not Sure Which Region Page Applies?
Send your bill of quantities, product sizes, pressure class and delivery addresses. Our technical team will confirm availability, standards documentation and a delivery band for your project location.
Frequently Asked Questions
4B Factory delivers to thirteen service areas from its Al-Kharj plant: Al-Kharj, Riyadh, Qassim, Dammam, Khobar, the wider Eastern Province, Taif, Hail, Makkah, Jeddah, Madinah, Yanbu and Tabuk. Delivery to other locations in the Kingdom and the wider GCC is arranged on request.
The plant is in Al-Kharj Industrial District 27, Saudi Arabia, roughly eighty kilometres south of Riyadh. All PVC and uPVC pipe is extruded there. The company was established in 2020 and trades as 4B Factory (Four Brothers Industrial Co.).
Yes. Because there is a single manufacturing site rather than a distributor network, the full range is available to every service area, including watermain pressure pipe, sewer and drain pipe, duct and conduit, ASTM pipe, perforated uPVC and custom fittings.
Lead time depends on order size, product and whether the load is consolidated. Central-region deliveries to Riyadh and Al-Kharj are the shortest. Eastern, Western, northern and north-western deliveries are consolidated into full loads. A confirmed lead time is issued with every quotation.
Yes, where the regions sit on the same corridor. Madinah and Yanbu are about 250 kilometres apart on the western route, and Taif sits on the same approach, so requirements in those areas are commonly consolidated onto a single scheduled load rather than shipped as separate part deliveries.
Yes. Multi-site contractors can place a single order and have it split across several delivery addresses. List each address and the quantities required per site when sending the bill of quantities so the loads can be planned correctly.
Yes. Compliance documentation covering the applicable Saudi Standards, SAS and SASO, together with ASTM and DIN specifications, is supplied with each order for contractor, consultant and municipal approval, in every service area.
The primary market is Saudi Arabia, served from Al-Kharj. Enquiries from the wider GCC are handled case by case depending on product, quantity and destination. Send the specification and delivery location and the team will confirm what is possible.
Request a Factory-Direct Quote
Send your product, sizes, pressure class, quantities and delivery location. Call, WhatsApp, or email info@4bfactory.com.