PVC & uPVC Pipe Supplier in Hail
4B Factory supplies PVC and uPVC pipe to Hail direct from its Al-Kharj plant, on a single overland route of roughly 720 kilometres. The range covers watermain pressure pipe in Classes 4 and 5, sewer and drain pipe from 110 to 710 mm, perforated well pipe, and SAS 254 electrical duct, with standards documentation for approval.
Manufactured in Saudi Arabia, sold factory-direct, with no distributor margin on project-scale orders for agricultural, municipal and industrial work across the Hail region.
Why Hail Projects Specify uPVC Pipe
Hail sits at the northern edge of the Najd, between the Aja and Salma ranges and the southern rim of the Nafud. It is one of the Kingdom’s principal irrigated farming regions, and centre-pivot cereal and fruit production there depends almost entirely on deep groundwater rather than surface supply. That single fact shapes most of the pipe demand in the region.
The requirement splits three ways. Abstraction needs well casing and screen. Distribution from the wellhead to the pivot needs pressure pipe sized for the pump duty. And the city itself, along with the surrounding settlements, needs municipal water and drainage as residential districts extend outward. Each is a different product, a different class and a different diameter band.
uPVC answers the material question in all three cases. It is non-metallic, so it is unaffected by the mineral content of deep aquifer water and by the chemistry of the soils it is buried in. It carries no scale, it does not pit, and a buried line laid to specification has a service life measured in decades.
Pipe Range Available in Hail
The full production range is extruded at Al-Kharj and supplied to Hail without substitution or third-party sourcing. Confirm exact ratings against the product datasheet for your application.
| Product line | Standard | Size range | Class or schedule | Typical Hail use |
|---|---|---|---|---|
| Watermain pressure pipe | Loc-Ring integral socket | 50–315 mm | Class 4 and Class 5 | Wellhead to pivot mains, municipal distribution |
| Sewer and drain pipe | SAS 1395 / 1396 | 110–710 mm | Class 2 to Class 4 | Gravity sewerage, stormwater, sub-soil drainage |
| Perforated uPVC pipe | Straight and staggered patterns | 75–500 mm | Custom perforation | Well screen, field drainage, sub-soil collection |
| uPVC duct pipe | SAS 254 / 255 | 20–63 mm | Socket, spigot, dry fit | Power and telephone cable protection |
| PVC conduit and duct | NEMA TC 2 EPC 80-PVC | ½″ to 6″ | EPC 80 | Electrical services on industrial and housing plots |
| ASTM standard pipe | ASTM D 1785 / D 2241 | ½″ to 8″ | Schedule 40, 80, 120 and SDR | Pump-house and plant-room pressure duty |
Pipe We Supply to Hail
Watermain Pressure Pipes
Loc-Ring integral socket with dual compression seal, 50 to 315 mm in Classes 4 and 5.
More Information →
Perforated uPVC Pipes
Straight and staggered perforation from 75 to 500 mm, with custom patterns to order.
More Information →
Sewer & Drain Pipes
SAS 1395 and 1396, Class 2 to 4, 110 to 710 mm in 6 and 9 metre lengths.
More Information →
uPVC Duct Pipes
SAS 254 and 255, 20 to 63 mm, dark grey, supplied in 6 metre lengths with socket.
More Information →The wider catalogue, including ASTM Schedule pipe, PVC conduit and duct, customised fittings and fabricated products, is listed on the products page.
Applications Across the Hail Region
Centre-Pivot Irrigation Mains
Pressure pipe carrying abstracted groundwater from the wellhead to the pivot point. Class selection follows the pump duty rather than the diameter, which is where most specification errors originate.
Well Casing & Screen
Deep abstraction in the region relies on cased boreholes. Perforated uPVC in straight or staggered pattern is produced to the slot arrangement and diameter the driller specifies.
Municipal Water & Drainage
Distribution mains and gravity sewerage for residential districts extending outward from the city, with stormwater lines sized for short, intense rainfall events.
Industrial Estate Services
Duct and conduit for power and telecom reticulation on serviced plots, plus process and pressure lines in Schedule 40 and 80 for plant-room and pump-house duty.
Farm & Field Drainage
Sub-soil collection using perforated pipe where irrigation returns and salinity management require controlled removal of water from the root zone.
Cable Protection on Utility Routes
SAS 254 duct laid ahead of power and telephone cable pulls on distribution routes and within new development plots.
Two Things Worth Planning for in Hail
Winter handling
Hail records some of the lowest winter temperatures in the Kingdom, and overnight sub-zero conditions are normal between December and February. Rigid uPVC becomes less forgiving of impact as temperature falls, so unloading, stacking and trench-laying on cold early mornings should avoid dropping pipe or striking sockets. Handled with that in mind, cold weather presents no performance issue in the installed line.
Distance and consolidation
Hail is a long-haul destination. A part load costs disproportionately more per metre than a full one, so quantities are best consolidated into a single scheduled delivery wherever the programme allows. Where a project runs in phases, we schedule against the phase dates rather than issuing repeated small drops.
For guidance on selecting the correct class before requesting pricing, see the pressure classes and sizes guide and the PVC pipe price guide.
Why Choose 4B Factory for a Hail Project
One Manufacturing Site
Every metre is extruded at Al-Kharj Industrial District 27. Batch consistency and accountability sit with the manufacturer, not a chain of resellers.
Factory-Direct Pricing
No distributor margin on project-scale orders, which matters more on a long-haul destination where freight already carries a cost.
Standards Documentation
SAS, SASO, ASTM and DIN documentation issued by product line, in the form required for municipal and government approval submissions.
Custom Perforation
Well screen and drainage pipe produced to the slot pattern, spacing and diameter specified, rather than to a fixed stock arrangement.
Technical Support
A Saudi-based team, in Arabic and English, for class selection, size checking, bill of quantities preparation and submittal documentation.
Full Range, One Order
Pressure, drainage, duct, conduit, ASTM pipe and fittings on a single order and a single delivery, from 20 mm conduit to 710 mm sewer pipe.
Delivery from Al-Kharj to Hail
| Destination | Approximate road distance | Delivery pattern |
|---|---|---|
| Hail city | Approximately 720 km | Consolidated full load, scheduled |
| Baqaa and Al-Ghazalah | Approximately 690–760 km | Scheduled with the Hail load |
| Al-Shinan and Al-Sulaimi | Approximately 760–820 km | Scheduled with the Hail load |
| Jubbah and northern settlements | Approximately 820–900 km | On request, project quantities |
Distances are approximate road distances from Al-Kharj Industrial District 27 and are given for planning purposes only. A confirmed lead time is issued with every quotation. The full service area is listed on the locations page.
Supplying Hail from a Single Saudi Plant
Agricultural, municipal and industrial pipe delivered on one overland route from Al-Kharj, with standards documentation supplied by product line and a confirmed lead time issued with every quotation.
PVC Pipe Supply in Hail: Common Questions
Yes. 4B Factory delivers the full PVC and uPVC range to Hail city and the surrounding region direct from the Al-Kharj plant, roughly 720 kilometres away by road. Deliveries are consolidated into full loads and scheduled against the project programme, and a confirmed lead time is issued with the quotation.
Buried irrigation mains normally use uPVC watermain pressure pipe in Class 4 or Class 5, sized from 50 to 315 mm. Class 4 is rated to around 10 Bar and Class 5 to around 16 Bar. Selection follows the pump duty and static head at the site, not the diameter alone.
Yes. Perforated uPVC is produced from 75 to 500 mm in straight or staggered patterns, and the perforation arrangement can be made to the slot size, spacing and open-area requirement specified by the driller or hydrogeologist rather than to a fixed stock pattern.
Pipes are manufactured to Saudi Standards, including SAS 254 and 255 for duct and SAS 1395 and 1396 for sewer and drain, with ASTM and DIN compliance where specified. Standards documentation is supplied by product line in the form required for municipal and government project approval submissions.
Installed and buried uPVC is unaffected by the region’s winter temperatures. The practical consideration is handling: rigid uPVC is less tolerant of impact when cold, so pipe should not be dropped or struck during unloading and laying on cold mornings. Normal care in handling removes the issue entirely.
There is no fixed minimum, but because Hail is a long-haul destination the freight component falls sharply once quantities fill a load. Small requirements are best combined with other items on the same order, or scheduled alongside another delivery to the region. We advise on this at quotation stage.
Yes. Custom sizing, fabricated long bends, flanged sockets, spigots and repair and register couplings are produced to order at the Al-Kharj plant. Send the drawing or the specification with the enquiry and the item is quoted alongside the standard pipe on the same order.
Request a Factory-Direct Quotation for Hail
Send your product, sizes, pressure class, quantities and delivery point in the Hail region, and our technical team will return a factory-direct quotation with a confirmed lead time. Bills of quantities and drawings are welcome.