PVC & uPVC Pipe Supplier in Yanbu
4B Factory supplies PVC and uPVC pipe to Yanbu from its Al-Kharj plant, roughly 1,030 kilometres away on the Red Sea coast. The range covers watermain pressure pipe in Classes 4 and 5, sewer and drain pipe from 110 to 710 mm, SAS 254 duct and ASTM Schedule pipe, with standards documentation issued by product line.
Manufactured in Saudi Arabia and sold factory-direct, for the port city, the industrial estate and the agricultural districts inland.
Three Cities, Three Different Pipe Requirements
Yanbu is unusual in that the name covers three distinct settlements with genuinely different demands. Yanbu Al-Bahr is the historic port and the residential centre. Yanbu Al-Sinaiyah is the planned industrial city to the south. Yanbu Al-Nakhl sits inland and remains agricultural. A supplier quoting for one of them is rarely quoting the same schedule as for the others.
What links them is water that arrives rather than water that is found. Yanbu is one of the Kingdom’s principal Red Sea desalination points, and the potable supply for the city and the industrial estate is conveyed and distributed rather than abstracted locally. That places the weight of demand on pressure pipe and on the distribution network behind it, in a way that inland cities dependent on groundwater do not share.
uPVC suits the duty on every count. It is non-metallic and carries no scale, it is unaffected by the mineral load of desalinated and blended supply, and it is unaffected by the saline soils and high humidity of the coastal strip.
Pipe Range Available in Yanbu
The full production range is extruded at Al-Kharj and supplied to Yanbu without substitution or third-party sourcing. Confirm exact ratings against the product datasheet for your application.
| Product line | Standard | Size range | Class or schedule | Typical Yanbu use |
|---|---|---|---|---|
| Watermain pressure pipe | Loc-Ring integral socket | 50–315 mm | Class 4 and Class 5 | Potable distribution, district mains, site supply |
| Sewer and drain pipe | SAS 1395 / 1396 | 110–710 mm | Class 2 to Class 4 | Gravity sewerage, coastal stormwater, sub-soil drainage |
| ASTM standard pipe | ASTM D 1785 / D 2241 | ½″ to 8″ | Schedule 40, 80, 120 and SDR | Pump-house, plant-room and utility pressure duty |
| uPVC duct pipe | SAS 254 / 255 | 20–63 mm | Socket, spigot, dry fit | Power and telephone cable protection |
| PVC conduit and duct | NEMA TC 2 EPC 80-PVC | ½″ to 6″ | EPC 80 | Electrical reticulation on industrial and housing plots |
| Perforated uPVC pipe | Straight and staggered patterns | 75–500 mm | Custom perforation | Sub-soil drainage, groundwater relief, date-farm drainage |
Pipe We Supply to Yanbu
Watermain Pressure Pipes
Loc-Ring integral socket with dual compression seal, 50 to 315 mm in Classes 4 and 5.
More Information →
Sewer & Drain Pipes
SAS 1395 and 1396, Class 2 to 4, 110 to 710 mm in 6 and 9 metre lengths.
More Information →
ASTM Standard Pipes
Schedule 40, 80 and 120 and SDR to ASTM D 1785 and D 2241, half inch to 8 inch.
More Information →
uPVC Duct Pipes
SAS 254 and 255, 20 to 63 mm, dark grey, supplied in 6 metre lengths with socket.
More Information →The wider catalogue, including PVC conduit and duct, perforated uPVC pipe, customised fittings and fabricated products, is listed on the products page.
Applications Across the Yanbu Area
Potable Distribution Networks
Class 4 and Class 5 uPVC carrying treated and blended supply into district mains and building connections across the port city and residential districts.
Industrial Estate Utilities
Non-process utility lines, site water, drainage and electrical reticulation on plots within the industrial city, quoted against the estate’s own specification requirements.
Coastal Stormwater & Drainage
Gravity sewerage and surface-water lines in Class 2 to 4, sized for the short, high-intensity rainfall events that characterise the Red Sea coastal strip.
Port & Logistics Facilities
Yard drainage, washdown lines, service water and cable ducting across warehousing, terminals and the commercial port hinterland.
Date Farms at Yanbu Al-Nakhl
Irrigation mains and sub-soil drainage inland, where perforated uPVC manages water in the root zone and pressure pipe carries supply to the plots.
Cable Protection on Utility Routes
SAS 254 duct and NEMA TC 2 conduit laid ahead of power and telecom pulls on distribution routes and within new development plots.
Two Things Worth Planning for in Yanbu
Saline ground and humidity
The coastal strip carries saline groundwater and salt-laden air, and buried metallic pipework in those conditions is on a corrosion clock from the day it is laid. uPVC is non-metallic, so the question does not arise: it does not pit, does not scale and needs no cathodic protection or wrapping. On a coastal site that removes both a maintenance liability and a line from the bill of quantities.
Distance and the Madinah route
Yanbu is the far end of a west-coast haul of roughly 1,030 kilometres. The practical consequence is that part loads are expensive per metre. Yanbu sits about 250 kilometres from Madinah, so where a contractor has requirements in both, consolidating them onto one scheduled load through the western corridor is materially cheaper than two separate drops.
For guidance on selecting the correct class before requesting pricing, see the pressure classes and sizes guide and the PVC pipe price guide.
Why Choose 4B Factory for a Yanbu Project
Saudi Manufacturing
Every metre is extruded at Al-Kharj Industrial District 27, which supports local content requirements and keeps batch accountability with the manufacturer.
Factory-Direct Pricing
No distributor margin on project-scale orders, which matters more on a west-coast destination where freight already carries a cost.
Standards Documentation
SAS, SASO, ASTM and DIN documentation issued by product line, in the form required for municipal, industrial-estate and government approval submissions.
Pressure and Schedule Range
Class 4 and 5 uPVC alongside ASTM Schedule 40, 80 and 120, so distribution and higher-pressure utility duty are covered from one supplier.
Technical Support
A Saudi-based team, in Arabic and English, for class selection, size checking, bill of quantities preparation and submittal documentation.
Consolidated Western Loads
Yanbu and Madinah requirements scheduled onto a single load through the western corridor rather than shipped as separate part deliveries.
Delivery from Al-Kharj to Yanbu
| Destination | Approximate road distance | Delivery pattern |
|---|---|---|
| Yanbu Al-Bahr | Approximately 1,030 km | Consolidated full load, scheduled |
| Yanbu Al-Sinaiyah | Approximately 1,050 km | Consolidated full load, scheduled |
| Yanbu Al-Nakhl | Approximately 990 km | Scheduled with the Yanbu load |
| Badr and Al-Rayes | Approximately 930–1,010 km | On request, project quantities |
Distances are approximate road distances from Al-Kharj Industrial District 27 and are given for planning purposes only. A confirmed lead time is issued with every quotation. The full service area is listed on the locations page.
Pipe for the Red Sea Coast
Potable distribution, drainage, duct and ASTM pressure pipe delivered to Yanbu on one scheduled western load, with standards documentation supplied by product line and a confirmed lead time issued with every quotation.
PVC Pipe Supply in Yanbu: Common Questions
Yes. 4B Factory delivers the full PVC and uPVC range to Yanbu Al-Bahr, Yanbu Al-Sinaiyah and Yanbu Al-Nakhl direct from the Al-Kharj plant, roughly 1,030 kilometres away by road. Loads are consolidated and scheduled through the western corridor, and a confirmed lead time is issued with the quotation.
Yes, and it is often the better choice there. uPVC is non-metallic, so saline groundwater, salt-laden air and high humidity do not corrode it. It requires no cathodic protection or protective wrapping, which removes both a cost line and a long-term maintenance liability on coastal sites.
Distribution networks normally use uPVC watermain pressure pipe in Class 4 or Class 5, sized from 50 to 315 mm. Class 4 is rated to around 10 Bar and Class 5 to around 16 Bar. The correct class follows the working pressure and static head on the network rather than the diameter alone.
Yes. We supply site water, drainage, duct and ASTM Schedule pipe for utility and non-process applications on industrial plots, with SAS, SASO, ASTM and DIN documentation issued by product line so it can be submitted for approval against the estate specification.
Yes. ASTM pipe to D 1785 and D 2241 is produced in Schedule 40, 80 and 120 and in SDR, from half an inch to 8 inch, in SCJ type and 6 metre lengths. It is normally specified for pump-house, plant-room and higher-pressure utility duty rather than for buried distribution mains.
Yes, and it usually should be. Yanbu is about 250 kilometres from Madinah on the same western corridor, so where a contractor has requirements in both, consolidating them onto a single scheduled load is materially cheaper per metre than two separate part deliveries.
Yes. Custom sizing, fabricated long bends rated 6 to 16 Bar, flanged sockets, spigots and repair and register couplings are produced to order at the Al-Kharj plant. Send the drawing or the specification with the enquiry and the item is quoted alongside the standard pipe on the same order.
Request a Factory-Direct Quotation for Yanbu
Send your product, sizes, pressure class, quantities and delivery point in the Yanbu area, and our technical team will return a factory-direct quotation with a confirmed lead time. Bills of quantities and drawings are welcome.