Technical Specification and Submittal Documentation for PVC Pipe Projects in Saudi Arabia

4B Factory provides technical specification sheets, dimensional and pressure tables, and complete submittal documentation for PVC and uPVC pipe manufactured to SAS, SASO, ASTM and DIN standards from its Al-Kharj plant, ready for consulting engineers and MEP firms to reference directly in a project specification or submittal package.

A technical submittal is reviewed on the completeness of the documentation behind it as much as on the product itself. A consulting engineer or MEP firm preparing a specification section needs dimensional and pressure data matched to the standard cited in the drawings, a clear reference for how the product should be described in the bill of quantities, and a technical contact who can confirm a query before the submittal is approved. This guide sets out what 4B Factory provides against each requirement, and how to reference 4B Factory pipe correctly when writing or reviewing a specification.

A submittal is approved on the data behind it, not on the product alone. 4B Factory provides one data sheet per product line, one set of standards records, and one technical contact for every specification query.

What a PVC Pipe Technical Submittal Package Should Contain

Consultants and project engineers evaluating a PVC or uPVC pipe submittal are typically checking for the same core documentation, whatever the standard or product line specified. 4B Factory provides the following against each of them as standard.

Specification Data by Product Line

Each 4B Factory product line is manufactured to a specific standard, with dimensional and pressure data available for direct use in a specification section or submittal data sheet.

Where a specification allows either pressure class on a watermain, Class 4 is rated to 10 Bar and Class 5 to 16 Bar. The Class 4 versus Class 5 uPVC pressure pipe comparison sets out which class suits which application in full.

How to Reference 4B Factory Pipe in a Specification Section

A specification clause should name the standard, the class or schedule, the size range taken from the drawings, and the documentation the supplier is to provide, in the same form used for any standards based pipe product. Two examples illustrate the pattern.

A sewer and drainage clause might read: sewer and drain pipe shall be uPVC, manufactured to SAS 1395 and 1396, Class 4, in sizes from 110 to 710 mm as scheduled on the drawings, with integral joints, supplied by a Saudi manufacturer able to provide standards compliance certificates and batch traceability on request.

A watermain clause might read: pressure pipe shall be uPVC with Loc-Ring integral socket joints, Class 4 rated to 10 Bar or Class 5 rated to 16 Bar as scheduled, in sizes from 50 to 315 mm, supplied with dimensional and pressure data on request.

The same pattern applies across every 4B Factory product line: name the standard, the class or schedule, the size range from the drawings, and the documentation the supplier must be able to provide.

Who This Serves

• Consulting engineers and design firms preparing a PVC or uPVC pipe specification section.
• MEP contractors executing works to an already approved specification.
• Technical and procurement reviewers evaluating a supplier's submittal documentation.
• Project teams cross referencing a submittal against standards named in a tender or bill of quantities.

Why Choose 4B Factory for Specification Led Projects

4B Factory has manufactured PVC and uPVC pipe in Al-Kharj Industrial District 27 since 2020, with standards documentation available across every product line from a single factory of origin. Specifying factory direct removes the need to reconcile data sheets across multiple distributors, since dimensional, pressure and standards data for every line comes from the same plant and the same technical contact. This keeps a specification consistent from design through to submittal review and delivery, whatever combination of product lines a project requires.

What to Include When Requesting a Submittal Pack

A submittal pack is confirmed faster, and matched more accurately to the specification, when the request already includes the following.

• The standard and class cited in the specification or drawings, for example SAS 1395 Class 4 or ASTM D 1785 Schedule 40.
• The product line and size range required, matched to the drawings or bill of quantities.
• The project or drawing reference the submittal should be matched against.
• Whether physical samples are required to support the submittal review.
• The submission deadline, if the review is tied to a project programme date.

Delivery and Technical Support Across Saudi Arabia

4B Factory delivers Kingdom wide from Al-Kharj, with established supply into Riyadh, Jeddah, Dammam, Khobar, Makkah, Madinah, Tabuk, Qassim and the Eastern Province. The same technical contact who supports a specification during design remains available once a submittal is approved and an order is placed, so a query raised during installation is answered by the team that supplied the original data sheet.